|
|
||||
|
» KOBE - CUT |
||||
An electrode designed for gauging, cutting & chamfering of various grades of steel like Mild Steel, Low Alloy Steel, SS and Cast Irons. There is no need of any gas like oxygen/acetylene of any other type of gas or compressed air, cuts are very smooth and the cutting and piercing can be done in all position. |
Recommended technique for application:
Hold the electrodes at 45° and press it on the job using to & for motion like sawing for cutting and by holding the electrode at 90° angle to the job, apply push in and pull our technique for piercing.
|
3.15x350 4.00x350 5.00x350 |
150-210 190-240 280-360
|
|
CUTTING ELECTRODE
|
||||||
